PRODUCTS

1) Model No :	PPT – 0.5
2) Fluid Inlet & Outlet size:	12.7 mm x 12.7 mm (1/2” BSP threaded end connection)
3) Air Inlet size:	1/4” BSP (6.3 mm)
4) Maximum Head:	Up to 50 meters on 1000 kg/m3 density.
5) Maximum Flow:	40 liter per minute on 1000 kg/m3 density.
6) Max density can work:	up to 1800 kg/m3
7) Media:	HCL, diluted acid, sodium hypochlorite, sodium hydroxide etc…
8) Air pressure required:	7 bar (100 psi) pressure required to work on full efficiency.
9) Per stroke Displacement:	0.5 LPM at 7 bar pressure, assuming a material of 1 density
10) Wetted Part:	Polypropylene
11) Diaphragm:	Teflon / Neoprene
12) Diaphragm Size:	OD-150 mm
13) Backup Diaphragm:	Santoprene
14) NRV Ball:	Teflon / Neoprene
15) Construction Type:	Bolted
16) Negative Suction:	Maximum capacity 3 meter and 7 meter with foot valve
17) Max Solid particle:	3.5 mm
18) Temperature can bare:	4° C to 70° C.
19) Pump Weight:	6 Kg
20) Packing Size (lxbxh):	26 cm x 28 cm x 33 cm
21) Delivery:	One week

PP Magnetic Drive Pumps

Zero leakage thanks to the absence of mechanical seals.
High chemical resistance due to polypropylene construction, making them suitable for aggressive media like acids, alkalis, and solvents.
Low maintenance and operating cost with simple design and fewer parts to replace.
Enhanced operator and environmental safety, by eliminating fluid escape into the workplace.

MP‑15: Flow up to 15 LPM, head up to 3.5 m, ceramic shaft, Viton/GFT/Carbon bushings, suitable for ~70 °C fluids.

MP‑125: Delivers up to 125 LPM at 12 m head, semi‑open impeller, similar construction.

MP‑400: Can push 380 LPM at 22 m head (2 HP motor).

MP‑500: Capacity up to 470 LPM at 28 m head.

MP‑650: Larger model with 620 LPM and 34 m head.

Requires clean fluids—PP magnetic drive pumps are sensitive to solids or debris, which can impair performance or damage the internal components. Users often install strainers upstream to protect them.
“They cannot handle many solids… We have had to replace two pumps already… added three screens to our influent… The pumps work great… swapping out the wet end is very easy.”

Material: Polypropylene (PP), sometimes PVDF for higher heat resistance

Seal Type: Sealless magnetic drive (no mechanical seal)

Advantages: Leak-free, low maintenance, high chemical tolerance

Common Flow/Head Ranges: 15 – 620 LPM, up to ~34 m head

Applications: Chemical transfer, acid/alkali handling, pharmaceutical, plating, etc.

Limitations: Requires clean fluids; solids may clog or damage