MAGNETIC DRIVE PUMPS
PPT-1
- Pump Type – Centrifugal, Vertical, Coupled type, Self Priming Pump
- Pump Material – Casing, Impeller and Back Plate is Made of PP (Polypropylene) Material
- Shaft – SS 316 / Titanium
- Pump Length – 400 mm
- Max Head – Up to 9 Meters
- Max Flow – 25 Liter per Minute
- Inlet & Outlet – 25 mm x 25 mm (Threaded end Connection)
| 1) Model No : | PPT – 0.5 |
| 2) Fluid Inlet & Outlet size: | 12.7 mm x 12.7 mm (1/2” BSP threaded end connection) |
| 3) Air Inlet size: | 1/4” BSP (6.3 mm) |
| 4) Maximum Head: | Up to 50 meters on 1000 kg/m3 density. |
| 5) Maximum Flow: | 40 liter per minute on 1000 kg/m3 density. |
| 6) Max density can work: | up to 1800 kg/m3 |
| 7) Media: | HCL, diluted acid, sodium hypochlorite, sodium hydroxide etc… |
| 8) Air pressure required: | 7 bar (100 psi) pressure required to work on full efficiency. |
| 9) Per stroke Displacement: | 0.5 LPM at 7 bar pressure, assuming a material of 1 density |
| 10) Wetted Part: | Polypropylene |
| 11) Diaphragm: | Teflon / Neoprene |
| 12) Diaphragm Size: | OD-150 mm |
| 13) Backup Diaphragm: | Santoprene |
| 14) NRV Ball: | Teflon / Neoprene |
| 15) Construction Type: | Bolted |
| 16) Negative Suction: | Maximum capacity 3 meter and 7 meter with foot valve |
| 17) Max Solid particle: | 3.5 mm |
| 18) Temperature can bare: | 4° C to 70° C. |
| 19) Pump Weight: | 6 Kg |
| 20) Packing Size (lxbxh): | 26 cm x 28 cm x 33 cm |
| 21) Delivery: | One week |
Fill Out the Form Below – We’re Here to Help!
PVDF Magnetic Drive Pumps
PVDF Mag Drive Pumps are excellent resistance against concentrated acids
PVDF Magnetic Drive Sealless Pumps are specialized centrifugal corrosion-resistant pumps designed for corrosive, toxic, hazardous, aggressive, or valuable liquids without leakage. Thanks to their sealless magnetic drive design and PVDF (polyvinylidene fluoride) construction. Since they are seal-less and operate with a magnetic drive coupling, there’s no risk of shaft seal failure, making them ideal for industries where leakage prevention and chemical resistance are critical.
Key Features
- Material of Construction: PVDF (Polyvinylidene Fluoride) – excellent resistance against concentrated acids, alkalis, solvents, and highly corrosive chemicals as HCl, H2SO4, HNO3, NaOH, and chlorinated solvents.
- Temperature Range: PVDF models typically operate up to 90–100°C.
- Seal-less Design: : No mechanical seals, eliminating leakage risks and hence reduces maintenance.
- Energy Efficient: Magnetic drive: Uses high-torque magnetic coupling (NdFeB magnets) to transmit motion without direct contact reduces energy loss and wear.
- Material: PVDF (polyvinylidene fluoride) for casing, impeller, back plate; ceramic shaft; VITON o-ring.
Applications
Chemical, Acid, Alkalis and Solvent transfer
Electroplating & surface treatment plants
Pharmaceuticals & Biotechnology
Water treatment (DM water, RO plants)
Electronics & Semiconductor industry (etching, cleaning solutions)
Pollution control & effluent treatment
Technical Specifications
Feature: PVDF Magnetic Drive Pump
Max Flow Up to 39 m³/h
Max Head Up to 32 meters
Temperature Up to 90–100°C
Viscosity Up to 800 centipoise
Solids Handling: Clean liquids (no solid particals)
